Difference between revisions of "Geotextiles"
		
		
		
		
		
		Jump to navigation
		Jump to search
		
				
		
		
	
| Jenny Hill (talk | contribs) | Jenny Hill (talk | contribs)  | ||
| Line 11: | Line 11: | ||
| </ol> | </ol> | ||
| − | <table class="table table- | + | <table class = "table-responsive"> | 
| + | <table class="table table-striped"> | ||
| <caption><strong>Recommended criteria for selection of geotextile fabric</strong></caption>   | <caption><strong>Recommended criteria for selection of geotextile fabric</strong></caption>   | ||
| <tr class="success"><th>Percent media passing 0.075 mm (#200 sieve)</th><th>Non-woven fabric apparent opening size (AOS, mm)</th><th>Woven fabric percent open area (POA, %)</th><th>Permittivity (sec<sup>-1</sup>)</th></tr> | <tr class="success"><th>Percent media passing 0.075 mm (#200 sieve)</th><th>Non-woven fabric apparent opening size (AOS, mm)</th><th>Woven fabric percent open area (POA, %)</th><th>Permittivity (sec<sup>-1</sup>)</th></tr> | ||
Revision as of 08:27, 5 July 2017
- Material specifications should conform to Ontario Provincial Standard Specification (OPSS) 1860 for Class II geotextile fabrics.
- Fabrics should be woven monofilament or non-woven needle punched. Woven slit film and non-woven heat bonded fabrics should not be used as they are prone to clogging.
Primary considerations are:
- Maximum forces that will be exerted on the fabric (i.e., what tensile, tear and puncture strength ratings are required?);
- Load bearing ratio of the underlying native soil (i.e. is the geotextile needed to prevent downward migration of aggregate into the native soil?);
- Texture (i.e., grain size distribution) of the overlying fill material; and
- Permeability of the native soil
- Suitable apparent opening size (AOS) for non-woven fabrics, or percent open area (POA) for woven fabrics, to maintain water flow even with sediment and microbial film build-up;
| Percent media passing 0.075 mm (#200 sieve) | Non-woven fabric apparent opening size (AOS, mm) | Woven fabric percent open area (POA, %) | Permittivity (sec-1) | 
|---|---|---|---|
| >85 | ≤ 0.3 | Not recommended | 0.1 | 
| 50 - 85 | ≥ 4 | ||
| 15 - 50 | ≤ 0.6 | 0.2 | |
| 5 - 15 | 0.5 | ||
| ≤ 5 | ≥ 10 |