Difference between revisions of "Dry ponds: TTT"
		
		
		
		
		
		Jump to navigation
		Jump to search
		
				
		
		
	
| Jenny Hill (talk | contribs) | Jenny Hill (talk | contribs)  | ||
| Line 1: | Line 1: | ||
| {{Clickable button|[[File:TTT.png|400 px|link=http://www.sustainabletechnologies.ca/wp/low-impact-development-treatment-train-tool/]]}} | {{Clickable button|[[File:TTT.png|400 px|link=http://www.sustainabletechnologies.ca/wp/low-impact-development-treatment-train-tool/]]}} | ||
| [[File:Storage TTT.png|thumb|[[Dry ponds]] are found in storage element in the LID TTT.]]   | [[File:Storage TTT.png|thumb|[[Dry ponds]] are found in storage element in the LID TTT.]]   | ||
| + | [[File:Pond curves.png|thumb|The largest area is level 0 m, the subsequent lower 'depths' get smaller]]  | ||
| Dry ponds are a storage element in the Treatment Train Tool. | Dry ponds are a storage element in the Treatment Train Tool. | ||
Revision as of 11:08, 29 September 2017
Dry ponds are a storage element in the Treatment Train Tool.
| Stage Storage | |
|---|---|
| Name | Important to have a unique name, to connect it with the catchment area | 
| Storage type | Dry detention ponds | 
| Bottom elevation (m) | This is important to correspond with other components, e.g. when the overflow is coupled to another BMP within a treatment train | 
| Maximum depth (m) | |
| Lined/unlined | Unlined (ideally) | 
| Underlying soil | Choose from five, where sandy soils will drain more quickly. | 
| Evaporation factor | ? | 
| Suction head (mm) | ? | 
| Saturated conductivity (mm/hr) | ? | 
| Initial soil moisture deficit (fraction) | ? | 
| Curves | |
| The Curves table is designed to accommodate the side slopes. The top line begins at 0 m, with subsequent depths in the following lines. | |


