Difference between revisions of "Reservoir aggregate"
Jump to navigation
Jump to search
Jenny Hill (talk | contribs) |
Jenny Hill (talk | contribs) m |
||
| Line 1: | Line 1: | ||
| − | Gravel for underdrains and underground infiltration structures should be 20-50 mm, uniformly-graded, clean, crushed angular stone that has a void ratio of 0.4 (40%)<ref>Porosity of Structural Backfill, Tech Sheet #1, Stormtech, Nov 2012, http://www.stormtech.com/download_files/pdf/techsheet1.pdf accessed 16 October 2017 </ref>. | + | For advice on decorative surface aggregates see [[Stone]]<br> |
| + | Gravel for underdrains and underground infiltration structures should be 20 - 50 mm, uniformly-graded, clean, crushed angular stone that has a void ratio of 0.4 (40%)<ref>Porosity of Structural Backfill, Tech Sheet #1, Stormtech, Nov 2012, http://www.stormtech.com/download_files/pdf/techsheet1.pdf accessed 16 October 2017 </ref>. | ||
| + | |||
| + | Gravel with structural requirements should also meet the following criteria: | ||
| + | *Maximum wash loss of 0.5% | ||
| + | *Minimum durability index of 35 | ||
| + | *Maximum abrasion of 10% for 100 revolutions and maximum of 50% for 500 revolutions | ||
[[category:materials]] | [[category:materials]] | ||
Revision as of 17:52, 22 November 2017
For advice on decorative surface aggregates see Stone
Gravel for underdrains and underground infiltration structures should be 20 - 50 mm, uniformly-graded, clean, crushed angular stone that has a void ratio of 0.4 (40%)[1].
Gravel with structural requirements should also meet the following criteria:
- Maximum wash loss of 0.5%
- Minimum durability index of 35
- Maximum abrasion of 10% for 100 revolutions and maximum of 50% for 500 revolutions
- ↑ Porosity of Structural Backfill, Tech Sheet #1, Stormtech, Nov 2012, http://www.stormtech.com/download_files/pdf/techsheet1.pdf accessed 16 October 2017