Difference between revisions of "Weirs"
Jump to navigation
Jump to search
Jenny Hill (talk | contribs) (Created page with "Weird") |
Jenny Hill (talk | contribs) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | The most common form of weir in LID practices is a rectangular weir, in the form of a [[check dam]] or flow control in a [[swale]] or other open channel. | |
| + | |||
| + | The flow (Q), may be calculated by measuring the height of water on the sill of the weir: | ||
| + | |||
| + | <math>Q=\frac{2}{3}C_{d}\cdot L\sqrt{2g}\cdot H^{\frac{3}{2}}</math> | ||
| + | {{Plainlist|1=Where: | ||
| + | *''C<sub>d</sub>'' = discharge coefficient (default 0.62 for a 'sharp edge). | ||
| + | *''L'' = Length of the weir (m) | ||
| + | *''g'' = Acceleration due to gravity (9.81 m/s<sup>2</sup>) | ||
| + | *''H'' = Height of water over the weir (m)}} | ||
| + | |||
| + | ==More flow related pages== | ||
| + | *[[Flow in a swale]] | ||
| + | *[[Flow through perforated pipe]] | ||
| + | *[[Flow through an orifice]] | ||
Latest revision as of 13:16, 3 July 2019
The most common form of weir in LID practices is a rectangular weir, in the form of a check dam or flow control in a swale or other open channel.
The flow (Q), may be calculated by measuring the height of water on the sill of the weir:
Where:
- Cd = discharge coefficient (default 0.62 for a 'sharp edge).
- L = Length of the weir (m)
- g = Acceleration due to gravity (9.81 m/s2)
- H = Height of water over the weir (m)