Difference between revisions of "Notation"
		
		
		
		
		
		Jump to navigation
		Jump to search
		
				
		
		
	
| Jenny Hill (talk | contribs) | Jenny Hill (talk | contribs)  | ||
| Line 7: | Line 7: | ||
| ;q | ;q | ||
| :infiltration rate in (length per time, usually mm/hr) (before or after application of safety factor?) | :infiltration rate in (length per time, usually mm/hr) (before or after application of safety factor?) | ||
| + | |||
| + | ;Q<sub>p</sub> | ||
| + | :Peak flow in units of volume per time (e.g. m<sup>3</sup>/s) | ||
| ;R<sub>a</sub>   | ;R<sub>a</sub>   | ||
Revision as of 15:11, 27 September 2017
- L
- Length, e.g. of a reach, channel or swale (usually in m)
- m
- run of side slopes in channel cross sections (length, but usually expressed as a ratio in relation to rise. e.g. where side side slopes = 1:3.5, m = 3.5)
- q
- infiltration rate in (length per time, usually mm/hr) (before or after application of safety factor?)
- Qp
- Peak flow in units of volume per time (e.g. m3/s)
- Ra
- Existing rise of swale gradient (length, usually m)
- Rb
- Rise of compensation gradient for an enhanced swale (length, usually m)
- SCF
- Safety correction factor (dimensionless)
- y
- Depth of water (length, usually m or sometimes mm)